Contact Details:
Tel: +27 11 974 7744
Fax: +27 11 974 2288
Email:  info@flexelec.co.za

Featuring:

xLogic SuperRelay

FAB Controller series
Bosch CL150 PLC
Euchner EKS

Euchner Safety Switches

 

Non-Contact Safety Switch
CES

 

Non-contact safety switches provide considerable advantages where tough ambient conditions apply. They are also especially suitable for use on imprecisely controlled safety equipment. Non-contact EUCHNER safety switches operate on the basis of clearly coded actuators. Manipulation of an actuator is thus impossible. Supply voltage and data transfer to the coded actuator are realized by means of a non-contact inductive read head. A monitoring output is additionally available for the safety outputs. Through the design of the evaluating device, the safety switch can be used for the highest safety requirements (Control Category 4: EN 954-1).

 

Safety switches with relay output for the output of a read-head.
Details
 
Safety switches with semiconductor output. Evaluation device and read-head integrated in one housing.
Details
Safety switches with relay output for the output of 1 to 2 or 2 to 4 read-heads.
Details

Features:

  • Uniquely coded actuator (unique item)
  • Teach-in function of the evaluation unit. Teaching of a new actuator with no additional equipment
  • Integrated safety device
  • Series connection with several evaluation units possible. Suitable for monitoring installations with several protective devices.
  • Two redundant safety outputs with internally monitored contacts
  • Suitable for safety category 4 according to EN 954-1 for monitoring short-circuits of safety outputs (CES-A-ABA-01)
  • Suitable for connection to a safety control module with or without pulse signalsˇ Built-in fault diagnosis
  • Output signal present, control module can request the status of the protective device
  • Actuator in compact design
  • Handles large mechanical tolerance for door alignment
  • Flush installation in door panel possible.

 

 

Street
Address:

60 Director Road, Spartan Ext. 24, Johannesburg,
South Africa.

Postal
Address:

PO Box 3881, Kempton Park, 1620, South Africa.

Tel: +27 11 974 7744
Fax: +27 11 974 2288
Email: info@flexelec.co.za
 

 

  Back to previous page Back to top